diff --git a/prusa-i3-mk2/slic3r/printer/Original Prusa i3 MK2 ColorPrint.ini b/prusa-i3-mk2/slic3r/printer/Original Prusa i3 MK2 ColorPrint.ini
index 72516de..06a69e8 100644
--- a/prusa-i3-mk2/slic3r/printer/Original Prusa i3 MK2 ColorPrint.ini	
+++ b/prusa-i3-mk2/slic3r/printer/Original Prusa i3 MK2 ColorPrint.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.30.0.25-prusa3d-release_candidate_1_3-win64 on Wed Jul 13 12:03:27 2016
+# generated by Slic3r 1.2.9 on Fri Aug 19 13:53:40 2016
 bed_shape = 0x0,250x0,250x210,0x210
 before_layer_gcode = 
 end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
@@ -6,22 +6,17 @@ extruder_offset = 0x0
 gcode_flavor = reprap
 layer_gcode = 
 nozzle_diameter = 0.4
-octoprint_apikey = E645B858A494494288E5AADF19F5B8D7
-octoprint_host = 192.168.1.38:5000
+octoprint_apikey = 27ED26EAA0564A99AFA7020EBB655F04
+octoprint_host = 192.168.1.40:5000
 pressure_advance = 0
-printer_settings_id = 
 retract_before_travel = 1
 retract_layer_change = 1
 retract_length = 0.8
 retract_length_toolchange = 3
 retract_lift = 0
-retract_lift_above = 1
-retract_lift_below = 199
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_speed = 35
-serial_port = 
-serial_speed = 250000
 start_gcode = M83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside pritn area\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line
 toolchange_gcode = 
 use_firmware_retraction = 0
diff --git a/prusa-i3-mk2/slic3r/printer/Original Prusa i3 MK2 with ZHop.ini b/prusa-i3-mk2/slic3r/printer/Original Prusa i3 MK2 with ZHop.ini
index 2e576d9..8c0c624 100644
--- a/prusa-i3-mk2/slic3r/printer/Original Prusa i3 MK2 with ZHop.ini	
+++ b/prusa-i3-mk2/slic3r/printer/Original Prusa i3 MK2 with ZHop.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.30.0.25-prusa3d-release_candidate_1_3-win64 on Sat Jul 23 08:40:46 2016
+# generated by Slic3r 1.2.9 on Fri Aug 19 13:53:50 2016
 bed_shape = 0x0,250x0,250x210,0x210
 before_layer_gcode = 
 end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
@@ -6,22 +6,17 @@ extruder_offset = 0x0
 gcode_flavor = reprap
 layer_gcode = 
 nozzle_diameter = 0.4
-octoprint_apikey = E645B858A494494288E5AADF19F5B8D7
+octoprint_apikey = 27ED26EAA0564A99AFA7020EBB655F04
 octoprint_host = 192.168.1.40:5000
 pressure_advance = 0
-printer_settings_id = 
 retract_before_travel = 1
 retract_layer_change = 1
 retract_length = 0.8
 retract_length_toolchange = 3
 retract_lift = 0.15
-retract_lift_above = 1
-retract_lift_below = 199
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_speed = 35
-serial_port = 
-serial_speed = 250000
 start_gcode = M83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside pritn area\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line
 toolchange_gcode = 
 use_firmware_retraction = 0