diff --git a/Slic3r settings MK2/filament/CPE HG 100.ini b/Slic3r settings MK2/filament/CPE HG 100.ini
index e5c4219..fe9bb84 100644
--- a/Slic3r settings MK2/filament/CPE HG 100.ini	
+++ b/Slic3r settings MK2/filament/CPE HG 100.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.33.4-prusa3d-win64 on Thu Feb 16 11:17:31 2017
+# generated by Slic3r 1.34.1.35-prusa3d-win64 on Thu May 18 10:19:12 2017
 bed_temperature = 90
 bridge_fan_speed = 50
 cooling = 1
@@ -13,6 +13,8 @@ filament_diameter = 1.75
 filament_max_volumetric_speed = 0
 filament_notes = "CPE HG 100\n \nTryska: 0,4mm\n \nTeploty: 260-265°C\nBed: 90\n \nPrůtok: 115%\nRetraction distance: 2,1 mm (při 1,5mm nitkovalo)\nRetraction speed: 30 mm/sec\nFan speed: 80% od 2 vrstvy\n \nDefault printing speed: 40 mm/sec\nOutline underspeed: 80%\nSolid infill underspeed: 80%"
 filament_settings_id = 
+filament_soluble = 0
+filament_type = PET
 first_layer_bed_temperature = 90
 first_layer_temperature = 260
 max_fan_speed = 80
diff --git a/Slic3r settings MK2/filament/ColorFabb Brass Bronze  1.75mm.ini b/Slic3r settings MK2/filament/ColorFabb Brass Bronze  1.75mm.ini
index 0b259c6..ebd0ab8 100644
--- a/Slic3r settings MK2/filament/ColorFabb Brass Bronze  1.75mm.ini	
+++ b/Slic3r settings MK2/filament/ColorFabb Brass Bronze  1.75mm.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.31.1.6-prusa3d-win64 on Thu Oct 27 17:42:13 2016
+# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:45 2017
 bed_temperature = 50
 bridge_fan_speed = 100
 cooling = 1
diff --git a/Slic3r settings MK2/filament/ColorFabb HT 1.75mm.ini b/Slic3r settings MK2/filament/ColorFabb HT 1.75mm.ini
index a7564f7..827fcfc 100644
--- a/Slic3r settings MK2/filament/ColorFabb HT 1.75mm.ini	
+++ b/Slic3r settings MK2/filament/ColorFabb HT 1.75mm.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.30.0-prusa3d-release_candidate_1_3 on Wed May 18 17:45:16 2016
+# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:45 2017
 bed_temperature = 105
 bridge_fan_speed = 30
 cooling = 1
diff --git a/Slic3r settings MK2/filament/ColorFabb Wood Bamboo 1.75mm.ini b/Slic3r settings MK2/filament/ColorFabb Wood Bamboo 1.75mm.ini
index 940b6b1..d2af2ed 100644
--- a/Slic3r settings MK2/filament/ColorFabb Wood Bamboo 1.75mm.ini	
+++ b/Slic3r settings MK2/filament/ColorFabb Wood Bamboo 1.75mm.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.31.1-prusa3d-win64 on Mon Oct 24 10:57:49 2016
+# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:45 2017
 bed_temperature = 50
 bridge_fan_speed = 100
 cooling = 1
diff --git a/Slic3r settings MK2/filament/ColorFabb XT 1.75mm.ini b/Slic3r settings MK2/filament/ColorFabb XT 1.75mm.ini
index 97d41e9..632dcc1 100644
--- a/Slic3r settings MK2/filament/ColorFabb XT 1.75mm.ini	
+++ b/Slic3r settings MK2/filament/ColorFabb XT 1.75mm.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.31.1.6-prusa3d-win64 on Thu Oct 27 17:43:17 2016
+# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:45 2017
 bed_temperature = 65
 bridge_fan_speed = 50
 cooling = 1
diff --git a/Slic3r settings MK2/filament/ColorFabb XT-CF20 1.75mm.ini b/Slic3r settings MK2/filament/ColorFabb XT-CF20 1.75mm.ini
index eab7877..efcab15 100644
--- a/Slic3r settings MK2/filament/ColorFabb XT-CF20 1.75mm.ini	
+++ b/Slic3r settings MK2/filament/ColorFabb XT-CF20 1.75mm.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.31.1-prusa3d-win64 on Mon Oct 24 09:49:44 2016
+# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:45 2017
 bed_temperature = 65
 bridge_fan_speed = 50
 cooling = 1
diff --git a/Slic3r settings MK2/filament/ColorFabb nGen 1.75mm.ini b/Slic3r settings MK2/filament/ColorFabb nGen 1.75mm.ini
index 2669a60..3b67d10 100644
--- a/Slic3r settings MK2/filament/ColorFabb nGen 1.75mm.ini	
+++ b/Slic3r settings MK2/filament/ColorFabb nGen 1.75mm.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.31.1.6-prusa3d-win64 on Thu Oct 27 17:43:02 2016
+# generated by Slic3r 1.34.1.35-prusa3d-win64 on Thu May 18 10:26:24 2017
 bed_temperature = 85
 bridge_fan_speed = 40
 cooling = 1
@@ -7,8 +7,14 @@ extrusion_multiplier = 1
 fan_always_on = 0
 fan_below_layer_time = 10
 filament_colour = #ACFDF8
+filament_cost = 0
+filament_density = 0
 filament_diameter = 1.75
+filament_max_volumetric_speed = 0
+filament_notes = ""
 filament_settings_id = 
+filament_soluble = 0
+filament_type = NGEN
 first_layer_bed_temperature = 85
 first_layer_temperature = 240
 max_fan_speed = 35
diff --git a/Slic3r settings MK2/filament/Fillamentum ABS 1.75mm.ini b/Slic3r settings MK2/filament/Fillamentum ABS 1.75mm.ini
index c10f2aa..e5bde07 100644
--- a/Slic3r settings MK2/filament/Fillamentum ABS 1.75mm.ini	
+++ b/Slic3r settings MK2/filament/Fillamentum ABS 1.75mm.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.30.0-prusa3d-release_candidate_1_3 on Wed May 18 12:37:56 2016
+# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:46 2017
 bed_temperature = 100
 bridge_fan_speed = 30
 cooling = 0
diff --git a/Slic3r settings MK2/filament/Fillamentum ASA 1.75mm.ini b/Slic3r settings MK2/filament/Fillamentum ASA 1.75mm.ini
index 35cf832..fb2da54 100644
--- a/Slic3r settings MK2/filament/Fillamentum ASA 1.75mm.ini	
+++ b/Slic3r settings MK2/filament/Fillamentum ASA 1.75mm.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.33.8.89-prusa3d-win64 on Wed Mar  8 11:24:50 2017
+# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:46 2017
 bed_temperature = 100
 bridge_fan_speed = 30
 cooling = 0
diff --git a/Slic3r settings MK2/filament/Fillamentum Timberfil.ini b/Slic3r settings MK2/filament/Fillamentum Timberfil.ini
index 215e21b..589245c 100644
--- a/Slic3r settings MK2/filament/Fillamentum Timberfil.ini	
+++ b/Slic3r settings MK2/filament/Fillamentum Timberfil.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.33.3-prusa3d-win64 on Fri Feb 10 15:01:39 2017
+# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:46 2017
 bed_temperature = 55
 bridge_fan_speed = 100
 cooling = 1
diff --git a/Slic3r settings MK2/filament/PC-ABS E3D 1.75mm.ini b/Slic3r settings MK2/filament/PC-ABS E3D 1.75mm.ini
index 5d4c2f1..36cfc10 100644
--- a/Slic3r settings MK2/filament/PC-ABS E3D 1.75mm.ini	
+++ b/Slic3r settings MK2/filament/PC-ABS E3D 1.75mm.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.30.0.25-prusa3d-release_candidate_1_3-win64 on Wed Aug 10 10:35:22 2016
+# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:46 2017
 bed_temperature = 100
 bridge_fan_speed = 30
 cooling = 0
diff --git a/Slic3r settings MK2/filament/PVA.ini b/Slic3r settings MK2/filament/PVA.ini
new file mode 100644
index 0000000..2456929
--- /dev/null
+++ b/Slic3r settings MK2/filament/PVA.ini	
@@ -0,0 +1,24 @@
+# generated by Slic3r 1.34.1.39-prusa3d-win64 on Mon May 22 10:11:57 2017
+bed_temperature = 55
+bridge_fan_speed = 100
+cooling = 0
+disable_fan_first_layers = 1
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 100
+filament_colour = #FFD1A4
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_max_volumetric_speed = 0
+filament_notes = "List of materials tested with standart PVA print settings for MK2:\n\nPrimaSelect PVA+\nICE FILAMENTS PVA 'NAUGHTY NATURAL'\nVerbatim BVOH"
+filament_settings_id = 
+filament_soluble = 1
+filament_type = PVA
+first_layer_bed_temperature = 55
+first_layer_temperature = 195
+max_fan_speed = 100
+min_fan_speed = 85
+min_print_speed = 15
+slowdown_below_layer_time = 25
+temperature = 195
diff --git a/Slic3r settings MK2/filament/Prusa ABS 1.75mm.ini b/Slic3r settings MK2/filament/Prusa ABS 1.75mm.ini
index ac30342..fdf9a13 100644
--- a/Slic3r settings MK2/filament/Prusa ABS 1.75mm.ini	
+++ b/Slic3r settings MK2/filament/Prusa ABS 1.75mm.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.31.6-prusa3d-win64 on Wed Dec 14 08:24:42 2016
+# generated by Slic3r 1.34.1.35-prusa3d-win64 on Thu May 18 10:20:02 2017
 bed_temperature = 100
 bridge_fan_speed = 30
 cooling = 0
@@ -7,10 +7,14 @@ extrusion_multiplier = 1
 fan_always_on = 0
 fan_below_layer_time = 20
 filament_colour = #3A80CA
+filament_cost = 0
+filament_density = 0
 filament_diameter = 1.75
 filament_max_volumetric_speed = 0
 filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
 filament_settings_id = 
+filament_soluble = 0
+filament_type = ABS
 first_layer_bed_temperature = 100
 first_layer_temperature = 255
 max_fan_speed = 30
diff --git a/Slic3r settings MK2/filament/Prusa HIPS 1.75mm.ini b/Slic3r settings MK2/filament/Prusa HIPS 1.75mm.ini
index 3e9a2ab..8fd8491 100644
--- a/Slic3r settings MK2/filament/Prusa HIPS 1.75mm.ini	
+++ b/Slic3r settings MK2/filament/Prusa HIPS 1.75mm.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.3.0-dev on Sun May  1 17:28:52 2016
+# generated by Slic3r 1.34.1.35-prusa3d-win64 on Thu May 18 10:20:14 2017
 bed_temperature = 100
 bridge_fan_speed = 50
 cooling = 1
@@ -7,8 +7,14 @@ extrusion_multiplier = 0.9
 fan_always_on = 1
 fan_below_layer_time = 10
 filament_colour = #FFE130
+filament_cost = 0
+filament_density = 0
 filament_diameter = 1.75
+filament_max_volumetric_speed = 0
+filament_notes = ""
 filament_settings_id = 
+filament_soluble = 0
+filament_type = HIPS
 first_layer_bed_temperature = 100
 first_layer_temperature = 220
 max_fan_speed = 50
diff --git a/Slic3r settings MK2/filament/Prusa PET 1.75mm.ini b/Slic3r settings MK2/filament/Prusa PET 1.75mm.ini
index d811175..f86f60d 100644
--- a/Slic3r settings MK2/filament/Prusa PET 1.75mm.ini	
+++ b/Slic3r settings MK2/filament/Prusa PET 1.75mm.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.31.3.1-prusa3d-win64 on Fri Nov 11 10:59:43 2016
+# generated by Slic3r 1.34.1.35-prusa3d-win64 on Thu May 18 10:20:09 2017
 bed_temperature = 90
 bridge_fan_speed = 50
 cooling = 1
@@ -7,10 +7,14 @@ extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 20
 filament_colour = #B5F5FD
+filament_cost = 0
+filament_density = 0
 filament_diameter = 1.75
 filament_max_volumetric_speed = 0
 filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
 filament_settings_id = 
+filament_soluble = 0
+filament_type = PET
 first_layer_bed_temperature = 85
 first_layer_temperature = 230
 max_fan_speed = 50
diff --git a/Slic3r settings MK2/filament/Prusa PLA 1.75mm.ini b/Slic3r settings MK2/filament/Prusa PLA 1.75mm.ini
index 06f25a1..f6963ac 100644
--- a/Slic3r settings MK2/filament/Prusa PLA 1.75mm.ini	
+++ b/Slic3r settings MK2/filament/Prusa PLA 1.75mm.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.33.8.153-prusa3d-win64 on Wed Apr  5 12:08:28 2017
+# generated by Slic3r 1.34.1.39-prusa3d-win64 on Mon May 22 10:12:50 2017
 bed_temperature = 55
 bridge_fan_speed = 100
 cooling = 1
@@ -11,8 +11,10 @@ filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
 filament_max_volumetric_speed = 0
-filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA"
+filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
 filament_settings_id = 
+filament_soluble = 0
+filament_type = PLA
 first_layer_bed_temperature = 55
 first_layer_temperature = 215
 max_fan_speed = 100
diff --git a/Slic3r settings MK2/filament/SemiFlex or Flexfill 98A.ini b/Slic3r settings MK2/filament/SemiFlex or Flexfill 98A.ini
index 2908f07..33e7ace 100644
--- a/Slic3r settings MK2/filament/SemiFlex or Flexfill 98A.ini	
+++ b/Slic3r settings MK2/filament/SemiFlex or Flexfill 98A.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.33.2.27-prusa3d-win64 on Tue Feb  7 08:19:55 2017
+# generated by Slic3r 1.34.1.35-prusa3d-win64 on Thu May 18 10:26:12 2017
 bed_temperature = 50
 bridge_fan_speed = 100
 cooling = 0
@@ -7,10 +7,14 @@ extrusion_multiplier = 1.2
 fan_always_on = 0
 fan_below_layer_time = 100
 filament_colour = #00CA0A
+filament_cost = 0
+filament_density = 0
 filament_diameter = 1.75
 filament_max_volumetric_speed = 0
 filament_notes = "List of materials tested with FLEX print settings & FLEX material settings for MK2:\n\nFillamentum Flex 98A\nFillamentum Flex 92A\nPlasty Mladeč PP\nPlasty Mladeč TPE32 \nPlasty Mladeč TPE88"
 filament_settings_id = 
+filament_soluble = 0
+filament_type = FLEX
 first_layer_bed_temperature = 50
 first_layer_temperature = 220
 max_fan_speed = 90
diff --git a/Slic3r settings MK2/filament/Taulman Bridge 1.75mm.ini b/Slic3r settings MK2/filament/Taulman Bridge 1.75mm.ini
index 65e3eb6..3884c1e 100644
--- a/Slic3r settings MK2/filament/Taulman Bridge 1.75mm.ini	
+++ b/Slic3r settings MK2/filament/Taulman Bridge 1.75mm.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.2.9 on Tue Apr 26 16:00:19 2016
+# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:46 2017
 bed_temperature = 50
 bridge_fan_speed = 40
 cooling = 0
diff --git a/Slic3r settings MK2/filament/Taulman T-Glase 1.75mm.ini b/Slic3r settings MK2/filament/Taulman T-Glase 1.75mm.ini
index ecff11b..14d7bac 100644
--- a/Slic3r settings MK2/filament/Taulman T-Glase 1.75mm.ini	
+++ b/Slic3r settings MK2/filament/Taulman T-Glase 1.75mm.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.2.9 on Tue Apr 26 16:00:19 2016
+# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:46 2017
 bed_temperature = 79
 bridge_fan_speed = 40
 cooling = 0
diff --git a/Slic3r settings MK2/filament/Verbatim PP.ini b/Slic3r settings MK2/filament/Verbatim PP.ini
index c9756bd..b63d6f3 100644
--- a/Slic3r settings MK2/filament/Verbatim PP.ini	
+++ b/Slic3r settings MK2/filament/Verbatim PP.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.33.8.117-prusa3d-win64 on Mon Mar 20 17:06:21 2017
+# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:46 2017
 bed_temperature = 100
 bridge_fan_speed = 100
 cooling = 1
diff --git a/Slic3r settings MK2/print/0.05mm DETAIL 0.25 nozzle.ini b/Slic3r settings MK2/print/0.05mm DETAIL 0.25 nozzle.ini
index 723d021..867a41f 100644
--- a/Slic3r settings MK2/print/0.05mm DETAIL 0.25 nozzle.ini	
+++ b/Slic3r settings MK2/print/0.05mm DETAIL 0.25 nozzle.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.33.8.124-prusa3d-win64 on Wed Mar 22 14:18:48 2017
+# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:46 2017
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 10
 bridge_acceleration = 300
diff --git a/Slic3r settings MK2/print/0.05mm DETAIL.ini b/Slic3r settings MK2/print/0.05mm DETAIL.ini
index e03fe70..b6a38d7 100644
--- a/Slic3r settings MK2/print/0.05mm DETAIL.ini	
+++ b/Slic3r settings MK2/print/0.05mm DETAIL.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.34.1.3-prusa3d-win64 on Tue Apr 25 09:43:38 2017
+# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:46 2017
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 10
 bridge_acceleration = 300
diff --git a/Slic3r settings MK2/print/0.10mm DETAIL 0.25 nozzle.ini b/Slic3r settings MK2/print/0.10mm DETAIL 0.25 nozzle.ini
index fab2081..7699a76 100644
--- a/Slic3r settings MK2/print/0.10mm DETAIL 0.25 nozzle.ini	
+++ b/Slic3r settings MK2/print/0.10mm DETAIL 0.25 nozzle.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.33.8.124-prusa3d-win64 on Wed Mar 22 14:19:01 2017
+# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:46 2017
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 10
 bridge_acceleration = 600
diff --git a/Slic3r settings MK2/print/0.10mm DETAIL.ini b/Slic3r settings MK2/print/0.10mm DETAIL.ini
index 5652187..634d55d 100644
--- a/Slic3r settings MK2/print/0.10mm DETAIL.ini	
+++ b/Slic3r settings MK2/print/0.10mm DETAIL.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.34.1.3-prusa3d-win64 on Tue Apr 25 09:44:11 2017
+# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:46 2017
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 10
 bridge_acceleration = 1000
diff --git a/Slic3r settings MK2/print/0.15mm OPTIMAL.ini b/Slic3r settings MK2/print/0.15mm OPTIMAL.ini
index 92a3221..968d3b1 100644
--- a/Slic3r settings MK2/print/0.15mm OPTIMAL.ini	
+++ b/Slic3r settings MK2/print/0.15mm OPTIMAL.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.34.1.3-prusa3d-win64 on Tue Apr 25 09:44:29 2017
+# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:46 2017
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 7
 bridge_acceleration = 1000
diff --git a/Slic3r settings MK2/print/0.20mm MM Soluble.ini b/Slic3r settings MK2/print/0.20mm MM Soluble.ini
new file mode 100644
index 0000000..7257d4e
--- /dev/null
+++ b/Slic3r settings MK2/print/0.20mm MM Soluble.ini	
@@ -0,0 +1,101 @@
+# generated by Slic3r 1.34.1.39-prusa3d-win64 on Mon May 22 10:10:35 2017
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 5
+bridge_acceleration = 1000
+bridge_flow_ratio = 0.95
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 30
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 20%
+fill_pattern = cubic
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 70%
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 2000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 100
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = Set your solluble extruder in Multiple Extruders > Support material/raft/skirt extruder &  Support material/raft interface extruder
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 40
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 1
+skirts = 0
+small_perimeter_speed = 20
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 1
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0
+support_material_enforce_layers = 0
+support_material_extruder = 2
+support_material_extrusion_width = 0.45
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 2
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 1
+support_material_threshold = 35
+support_material_with_sheath = 1
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 30
+top_solid_layers = 6
+travel_speed = 120
+wipe_tower = 0
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
diff --git a/Slic3r settings MK2/print/0.20mm NORMAL.ini b/Slic3r settings MK2/print/0.20mm NORMAL.ini
index 6b22349..08de4f3 100644
--- a/Slic3r settings MK2/print/0.20mm NORMAL.ini	
+++ b/Slic3r settings MK2/print/0.20mm NORMAL.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.34.1.3-prusa3d-win64 on Tue Apr 25 09:44:37 2017
+# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:46 2017
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 5
 bridge_acceleration = 1000
@@ -51,7 +51,7 @@ perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
 perimeter_speed = 40
-perimeters = 3
+perimeters = 2
 post_process = 
 print_settings_id = 
 raft_layers = 0
diff --git a/Slic3r settings MK2/print/0.20mm SemiFlex or Flexfill98A.ini b/Slic3r settings MK2/print/0.20mm SemiFlex or Flexfill98A.ini
index 7b6c271..af3a7db 100644
--- a/Slic3r settings MK2/print/0.20mm SemiFlex or Flexfill98A.ini	
+++ b/Slic3r settings MK2/print/0.20mm SemiFlex or Flexfill98A.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.33.8.124-prusa3d-win64 on Wed Mar 22 14:19:24 2017
+# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:46 2017
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 5
 bridge_acceleration = 1000
diff --git a/Slic3r settings MK2/print/0.35mm FAST.ini b/Slic3r settings MK2/print/0.35mm FAST.ini
index e3e93af..3d891d5 100644
--- a/Slic3r settings MK2/print/0.35mm FAST.ini	
+++ b/Slic3r settings MK2/print/0.35mm FAST.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.34.1.3-prusa3d-win64 on Tue Apr 25 09:44:56 2017
+# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:46 2017
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 3
 bridge_acceleration = 1000
diff --git a/Slic3r settings MK2/printer/Original Prusa i3 MK2 0.25 nozzle with ZHop.ini b/Slic3r settings MK2/printer/Original Prusa i3 MK2 0.25 nozzle with ZHop.ini
index 086c645..03913ea 100644
--- a/Slic3r settings MK2/printer/Original Prusa i3 MK2 0.25 nozzle with ZHop.ini	
+++ b/Slic3r settings MK2/printer/Original Prusa i3 MK2 0.25 nozzle with ZHop.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.33.3-prusa3d-win64 on Fri Feb 10 15:04:02 2017
+# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:46 2017
 bed_shape = 0x0,250x0,250x210,0x210
 before_layer_gcode = 
 end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
@@ -10,7 +10,6 @@ min_layer_height = 0.05
 nozzle_diameter = 0.25
 octoprint_apikey = 
 octoprint_host = 
-pressure_advance = 0
 printer_settings_id = 
 retract_before_travel = 1
 retract_layer_change = 1
diff --git a/Slic3r settings MK2/printer/Original Prusa i3 MK2 ColorPrint.ini b/Slic3r settings MK2/printer/Original Prusa i3 MK2 ColorPrint.ini
index 7b70a66..1d63e77 100644
--- a/Slic3r settings MK2/printer/Original Prusa i3 MK2 ColorPrint.ini	
+++ b/Slic3r settings MK2/printer/Original Prusa i3 MK2 ColorPrint.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.33.3-prusa3d-win64 on Fri Feb 10 15:03:08 2017
+# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:46 2017
 bed_shape = 0x0,250x0,250x210,0x210
 before_layer_gcode = 
 end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
@@ -10,7 +10,6 @@ min_layer_height = 0.07
 nozzle_diameter = 0.4
 octoprint_apikey = 
 octoprint_host = 
-pressure_advance = 0
 printer_settings_id = 
 retract_before_travel = 1
 retract_layer_change = 1
diff --git a/Slic3r settings MK2/printer/Original Prusa i3 MK2 MultiMaterial.ini b/Slic3r settings MK2/printer/Original Prusa i3 MK2 MultiMaterial.ini
index f6dd280..b0dadb6 100644
--- a/Slic3r settings MK2/printer/Original Prusa i3 MK2 MultiMaterial.ini	
+++ b/Slic3r settings MK2/printer/Original Prusa i3 MK2 MultiMaterial.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.33.8.153-prusa3d-win64 on Thu Mar 30 14:58:29 2017
+# generated by Slic3r 1.34.1.35-prusa3d-win64 on Thu May 18 12:50:53 2017
 bed_shape = 0x0,250x0,250x210,0x210
 before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
 end_gcode = M107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors\n\n
@@ -10,7 +10,7 @@ min_layer_height = 0.07,0.07,0.07,0.07
 nozzle_diameter = 0.4,0.4,0.4,0.4
 octoprint_apikey = 
 octoprint_host = 
-pressure_advance = 0
+printer_notes = 
 printer_settings_id = 
 retract_before_travel = 3,3,3,3
 retract_layer_change = 0,0,0,0
@@ -24,6 +24,7 @@ retract_restart_extra_toolchange = 0,0,0,0
 retract_speed = 50,50,50,50
 serial_port = 
 serial_speed = 250000
+single_extruder_multi_material = 0
 start_gcode = ; Start G-Code sequence START\nT99\nM109 S[first_layer_temperature]\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0  F1000.0\nG1 X160.0 E20.0  F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\nG92 E0.0
 toolchange_gcode = 
 use_firmware_retraction = 0
diff --git a/Slic3r settings MK2/printer/Original Prusa i3 MK2 with ZHop.ini b/Slic3r settings MK2/printer/Original Prusa i3 MK2 with ZHop.ini
index 388b27e..befe877 100644
--- a/Slic3r settings MK2/printer/Original Prusa i3 MK2 with ZHop.ini	
+++ b/Slic3r settings MK2/printer/Original Prusa i3 MK2 with ZHop.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.33.3-prusa3d-win64 on Fri Feb 10 15:03:00 2017
+# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:46 2017
 bed_shape = 0x0,250x0,250x210,0x210
 before_layer_gcode = 
 end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
@@ -10,7 +10,6 @@ min_layer_height = 0.07
 nozzle_diameter = 0.4
 octoprint_apikey = 
 octoprint_host = 
-pressure_advance = 0
 printer_settings_id = 
 retract_before_travel = 1
 retract_layer_change = 1
diff --git a/Slic3r settings MK2/simple.ini b/Slic3r settings MK2/simple.ini
index 7b72f19..a327c57 100644
--- a/Slic3r settings MK2/simple.ini	
+++ b/Slic3r settings MK2/simple.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.2.9 on Tue Apr 26 16:00:19 2016
+# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:45 2017
 avoid_crossing_perimeters = 1
 bed_shape = 0x0,200x0,200x200,0x200
 bed_temperature = 0
@@ -38,7 +38,6 @@ first_layer_height = 0.4
 first_layer_speed = 30%
 first_layer_temperature = 0
 gap_fill_speed = 20
-gcode_arcs = 0
 gcode_comments = 0
 gcode_flavor = reprap
 infill_acceleration = 0
@@ -113,6 +112,5 @@ top_solid_layers = 3
 travel_speed = 100
 use_firmware_retraction = 0
 use_relative_e_distances = 0
-vibration_limit = 0
 wipe = 0
 z_offset = 0
diff --git a/Slic3r settings MK2/slic3r.ini b/Slic3r settings MK2/slic3r.ini
index e945da9..a71ef53 100644
--- a/Slic3r settings MK2/slic3r.ini	
+++ b/Slic3r settings MK2/slic3r.ini	
@@ -1,14 +1,14 @@
-# generated by Slic3r 1.33.8.129-prusa3d-win64 on Thu Mar 23 14:23:51 2017
+# generated by Slic3r 1.34.1.39-prusa3d-win64 on Mon May 22 10:14:16 2017
 autocenter = 
 background_processing = 0
-last_output_path = C:\Users\Jindřich Beneš\Desktop
+last_output_path = C:\Users\Jindřich Beneš\Desktop\3d print\MM
 main_frame_maximized = 
-main_frame_pos = 85,67
-main_frame_size = 938,552
+main_frame_pos = 114,68
+main_frame_size = 972,574
 mode = expert
 no_controller = 1
 no_defaults = 1
-version = 1.33.8.129-prusa3d-win64
+version = 1.34.1.39-prusa3d-win64
 version_check = 1
 
 [presets]
@@ -20,5 +20,5 @@ print = 0.15mm OPTIMAL.ini
 printer = Original Prusa i3 MK2 with ZHop.ini
 
 [recent]
-config_directory = D:\temp\Slic3r-1.33.8.124-prusa3d-win64-full-gd8f0c0b-201703201456
+config_directory = C:\Users\Jindřich Beneš\Desktop
 skein_directory = C:\Users\Jindřich Beneš\Desktop