diff --git a/Slic3r settings MK2/printer/Original Prusa i3 MK2 ColorPrint.ini b/Slic3r settings MK2/printer/Original Prusa i3 MK2 ColorPrint.ini
deleted file mode 100644
index 1d63e77..0000000
--- a/Slic3r settings MK2/printer/Original Prusa i3 MK2 ColorPrint.ini	
+++ /dev/null
@@ -1,33 +0,0 @@
-# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:46 2017
-bed_shape = 0x0,250x0,250x210,0x210
-before_layer_gcode = 
-end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
-extruder_offset = 0x0
-gcode_flavor = reprap
-layer_gcode = 
-max_layer_height = 0.25
-min_layer_height = 0.07
-nozzle_diameter = 0.4
-octoprint_apikey = 
-octoprint_host = 
-printer_settings_id = 
-retract_before_travel = 1
-retract_layer_change = 1
-retract_length = 0.8
-retract_length_toolchange = 3
-retract_lift = 0
-retract_lift_above = 1
-retract_lift_below = 199
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 35
-serial_port = 
-serial_speed = 250000
-start_gcode = M115 U3.0.9 ; tell printer latest fw version\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside pritn area\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 1
-use_volumetric_e = 0
-variable_layer_height = 1
-wipe = 1
-z_offset = 0