Removed the config bundles, moved one level up

Slic3r settings MK2/printer/Original Prusa i3 MK2 ColorPrint.ini

@@ -0,0 +1,32 @@
+# generated by Slic3r 1.30.0.25-prusa3d-release_candidate_1_3-win64 on Tue Sep  6 15:16:35 2016
+bed_shape = 0x0,250x0,250x210,0x210
+before_layer_gcode = 
+end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
+extruder_offset = 0x0
+gcode_flavor = reprap
+layer_gcode = 
+nozzle_diameter = 0.4
+octoprint_apikey = 
+octoprint_host = 
+pressure_advance = 0
+printer_settings_id = 
+retract_before_travel = 1
+retract_layer_change = 1
+retract_length = 0.8
+retract_length_toolchange = 3
+retract_lift = 0
+retract_lift_above = 1
+retract_lift_below = 199
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 35
+serial_port = 
+serial_speed = 250000
+start_gcode = M115 U3.0.8 ; tell printer latest fw version\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside pritn area\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+vibration_limit = 0
+wipe = 1
+z_offset = 0